Using double-poured alginate impressions to fabricate bleaching trays

V. B. Haywood, A. Powe

Research output: Contribution to journalArticlepeer-review

4 Scopus citations


Esthetic and diagnostic treatment often requires two casts of one arch, one for baseline and one for alterations (diagnostic wax-up, bleaching tray, occlusal analysis). The purpose of this study was to compare the accuracy of stone casts generated from a second pour of a properly handled alginate impression with first-poured casts. A maxillary dentoform was indexed with six reference spaces (#8-15,9-2,2-15, and incisal-to-gingival of #3,9, 14). Irreversible hydrocolloid (Jeltrate) impressions were made in perforated steel trays by a single investigator. Impression material was spatulated for 1 minute. The seated impression and dentoform were wrapped in a damp paper towel to simulate intraoral conditions, and allowed to set for 2 minutes. Upon separation, the impression was stored in a damp towel for 5 minutes. The impression was poured in cast stone (Microstone) according to the manufacturer's instructions. The stone-filled impression was immediately rewrapped in a damp paper towel and allowed to set for 45 minutes at room temperature. Upon removal of the stone, the impression was rinsed with cold water, shaken dry, and repoured in the same manner. Ten impressions were made: the first five impressions were poured to make casts for Group A, then repoured as described above for casts for Group B. The remaining five impressions were poured once to make casts for Group C. The six spaces of each cast were measured three times in random order using a dial caliper and the space average calculated for the cast. At each space, analysis of variance showed no significant difference among Groups A, B, or C (P < 0.05). When alginate impressions that have been poured with cast stone are kept moist during stone setting and repoured within 45 minutes, two casts can be generated from one impression with the same degree of accuracy as two casts made from taking two separate impressions, providing the alginate does not tear during first cast removal.

Original languageEnglish (US)
Pages (from-to)128-131
Number of pages4
JournalOperative dentistry
Issue number3
StatePublished - Mar 1998

ASJC Scopus subject areas

  • Dentistry(all)


Dive into the research topics of 'Using double-poured alginate impressions to fabricate bleaching trays'. Together they form a unique fingerprint.

Cite this